3.2 - Get a New Address
- Spencer Whetstone (Unlicensed)
- Ruben Elizondo (Unlicensed)
- Nathan Bode (Unlicensed)
Owned by Spencer Whetstone (Unlicensed)
Creating a New Address in Your Arizen Wallet
Whenever adding a new address or importing any private key(s), you MUST create a new backup as all your previous backups will not contain the private keys for the newly added/imported addresses!
You can get a new "T (Transparent)" address as well as a "Z (Private Zero Knowledge)" address.
- Click on Get new address and select the type of the address you need, see Figure 3.3. If you don’t have a connected Node you will only be able to create T addresses, as it’s shown in the Figure 3.4.
- After clicking "Create", the Z address will appear in your Arizen wallet, as shown in Figure 3.5. The new Z address is created on the Secure/Super Node and it's Private Key is also added into the Arizen Wallet.
Please note that you can create new private Z address only if you have both LEDs light green and you are connected to your zend.
Figure 3.3: You can choose the Z address only if you have a connected Secure or Super Node.
Figure 3.4: You can choose only a T address if you don’t have a connected Secure or Super Node.
Figure 3.5: The entire Z address isn’t shown in the "Overview" tab. For a detail view, click on the "i" icon.
© 2020 Horizen. All rights reserved.